To view content specific to your vehicle,
please choose your make and model.

       
Close

News

Featured articles, social media and more

SEAT Leon Cupra: Mean and Green

July 12th, 2012

The SEAT brand isn't sold here in the US, but it doesn't make this car any less spectacular. The Leon Cupra is one the many European hot hatches that hasn't made it to our market, but Swedish owner "MyGel" as he is known on the forums, has built a car that we would love to have. This particular car features our P40 forged wheels in a gloss black finish that look fantastic against the lime green paint.

The mod list on this car is extensive and it's been converted to an all-wheel-drive setup to ensure that the turbocharged 2.0 liter is putting all of the horsepower to the ground. See the full details below and the build thread here:

Engine: 2.0 TSI

Cylinder/valvesl : 4 cyl 16v
Cm3 : 1984cm3
Exhaust: 3" fullflow exhaust 100cpi Racecatt
Fuelsystem : Direct Injection, Turbo, double Intercoolers, water/meth
Fuel : 98 / 99 +
alternator : 140A
Battery : Optima YT42 x 2

Fluids used in the car:

Red Line: Extreme Street Performance in engine 15w50
Red Line: Heavy Shockproof gear oil in gearbox
Red Line: WaterWetter in cooling system
Motul RBF600 in brake/clutch system

Spec on engine gearbox and surroundings:

Stress drilled / Honed 2,0 Tfsi AXX block
Scat H Rods
JE-Pistons
ACL Calico Coated Race Main Bearings
ACL Calico Coated Race Rod Bearings
ARP rod Bolts
ARP Head Studs
ARP Main Studs
ARP Crank Damper Bolts

FluidDampr, Pulley
APR TFSI Fuelpump
RS4 Injectors
RS4 fuelreturn valve
Devils Own Water/meth injection
Forge twintercooler (fmic) togheter with OEM Audi S3 Intercooler
Forge Red Silikon hoses to IC, Water and DV
Forge Vacum DV
Audi R8 Oilcap

VF-Engineering:
Enginemount in Polyeretan
Gearbox mount in Polyeretan
Powerflex Dogboune rear engine mount
Powerflex to to front engine mount

3" turboback exhaust,
3" Downpipe V-Band to 100 Cpi FIA-cert Racecat or decat/Testpipe for racetrack or events.
3" JE-Design end muffler with 4x90mm

Neuspeed P.Flo : Modified to K04
Neuspeed CAI Extension
BSH High flow IC Pipe with 2 Meth bungles
Neuspeed Hi-Flow Turbo Discharge : Modified to K04
Neuspeed Carbon Engine cover

Head is planed, tested and upgraded with a
complete set Ferrea Race valve train

BSH Race Catch Tank
OEM Plastic intake is sligtly modified with remowed flaps etc.

6speed gearbox,
Quaife differential
ARP Ring Gear Bolts
Southbend stage 5 Chryo treated clutchkit=
Singlemass flywheel
6 pucked sinter
Custom reinforced pressureplate
ARP Heavy Duty Flywheel Bolts

Forge Short Shift
Forge Short Sideshifter
42draft Design Alu / copper bushings

WOT Box With adjustable Launchcontrol and WOT
Turbosmart Eboost Street

Chassis:
Front:
KW V3 Coilovers
KW adjustable Anti roll bars
Whiteline Anti Lift Kit
All bushes in front uppgraded to Powerflex
K-Sport adjustable Endlinks

Rear:
KW V3 Coilovers
KW adjustable Anti roll bars
Nuespeed Reinforced endlinks
All bushings in Rear uppgraded to Powerflex

Brakes Front:

Lamborghini Gallardo 8 Piston Calipers
RS6+ Competition discs 365x34mm
HEL , custom SS braided hoses.
Ferodo DS2500

Rear :

VW R32 brake caliper
R32 discs 310x22mm
HEL SS braided hoses
Ferodo DS2500

Rims:

Summer:
HRE P40s 19x8,5 ET35 glossblack
Pirelli P-Zero 235/35-19"

Inside:

Custom Mk5 Turbo Pressure Gauge

The other ones are in a custom made A pillar pod in original fabric.
Wideband Lambda
Oil pressure
Oil Temp
Volt

Audio:

Pioneer AVIC-F30BT Multimedia/Navigation unit

Rebuilded front doors with

MDS Dynamic DC6 MkII kits 1 pair per doorside
Amps to them
2pc MDS T3 A/B Fullfrekvens Hi-Fi Monoblock 1x800wrms per side.

Subwoofer enclosure is build´t to be easy to take out when needed.
2pc MDS DS1214- 12x14" subwoofer
amp for them is MDS T5 Monoblock 1750wrms in 1ohm

Double Optima Yellow topp "YT42" Batteries

Styling:

JE-Design Bodykit,
JE Design Widebodykit,
(Modified to be as i want to and so nobody has the same.)

JE-Design Sport grill
JE-Design rear spoiler
(Modified with Carbon vingplane)

Carbon Hood, Both innerframe and outside is 100 Carbon =3,5kg
(made in moulds from my OEM hood and then glued togheter)
Aerocatch Locks

Carbon Diffuser
Partly Carbon on front
Carbon eyebrows
Carbon B och C
(All carbon is genuine and real no folio)

MDS Lightning Division LED/RGB under the car.
(Only for shows!)

half beam Xenon D1S 35w 6000K
Fullbeam 55w Xenon 6000k
extra lights 35w xenon 6000k
Parking lights CanLed 6000k

Dectane Autocoutore, rear lamps with LED & Fiber

Connect

Signup to keep updated with HRE news, events, and new product information.

 
YouTube
You need Flash player 8+ and JavaScript enabled to view this video.
Archive